References

Dorn Spinal Therapy

Spine Healing Therapy

Get Instant Access

Americans with Disabilities. (1994). Bureau of Census Statistical Brief, SB/94-1, US Department of Commerce, January.

Arva, J., Fitzgerald, S.G., Cooper, R.A., Boninger, M.L., Spaeth, D.M. and Corfman, T.J. (2001). Mechanical efficiency and user power reduction with the JWII pushrim activate power assisted wheelchair. MedEngPhys, 23(12), 699-705.

Asato, K.T., Cooper, R.A., Robertson, R.N. and Ster, J.F. (1993). SMARTWheels: development and testing of a system for measuring manual wheelchair propulsion dynamics. IEEE Trans BiomedEng, 40(12), 1320-1324.

Bayley, J.C., Cochran, T.P. and Sledge, C.B. (1987). The weight-bearing shoulder: the impingement syndrome in paraplegics. J Bone Joint Surg Am, 69(5), 676-678.

Bertocci, G.E., Hobson, D.A. and Digges, K. (1996). Development of transportable wheelchair design criteria using computer crash simulation. IEEE Trans Rehabil Eng, 4(3), 171-181.

Bertocci, G.E., Szobota, S., Digges, K. and Hobson, D.A. (1999a). Computer simulation and sled test validation of a powerbase wheelchair and occupant subjected to frontal crash conditions. IEEE Trans Neural Syst Rehabil Eng, 7(2), 234-244.

Bertocci, G., Cooper, R.A., Young, T., Esteireiro, J. and Thomas C. (1999b). Testing and evaluation of wheelchair caster assemblies subjected to dynamic crash loading. J Rehabil Res Dev, 36(1), 32-41.

Bertocci, G., Manary, M. and Ha, D. (2001). Wheelchairs used as motor vehicle seats: seat loading in frontal impact sled testing. Med Eng Phys, 23(10), 679-685.

Boninger, M.L., Cooper, R.A., Robertson, R.N. and Shimada, S.D. (1997). 3-D pushrim forces during two speeds of wheelchair propulsion. Am J Phys Med Rehabil, 76(5), 420-426.

Boninger, M.L., Saur, T., Trefler, E., Hobson, D.A., Burdette, R. and Cooper, R.A. (1998a). Postural changes with aging in tetraplegia. Arch Phys Med Rehabil, 79, 1577-1581.

Boninger, M.L., Cooper, R.A., Shimada, S.D. and Rudy, T.E. (1998b). Shoulder and elbow motion during two speeds of wheelchair propulsion: a description using a local coordinate system. Spinal Cord, 36(6), 418-426.

Boninger, M.L., Cooper, R.A., Baldwin, M.A., Shimada, S.D. and Koontz, A. (1999). Wheelchair pushrim kinetics: weight and median nerve function. Arch Phys Med Rehabil, 80(8), 910-915.

Boninger, M.L., Baldwin, M., Cooper, R.A., Koontz, A.M. and Chan, L. (2000). Manual wheelchair pushrim biomechanics and axle position. Arch Phys Med Rehabil, 81(5), 608-613.

Boninger, M.L., Towers, J.D., Cooper, R.A., Dicianno, B.E. and Munin, M.C. (2001). Shoulder imaging abnormalities in individuals with paraplegia. J Rehabil Res Dev, 38(4), 401-408.

Boninger, M.L., Souza, A.L., Cooper, R.A., Fitzgerald, S.G., Koontz, A.M. and Fay, B.T. (2002). Propulsion patterns and pushrim biomechanics in manual wheelchair propulsion. Arch Phys Med Rehabil, 83(5), 718-723.

Boninger, M.L., Dicianno, B.E., Cooper, R.A., Towers, J.D., Koontz, A.M. and Souza, AL. (2003a). Shoulder injury, wheelchair propulsion, and gender. Arch Phys Med Rehabil, 84(11), 1615-1620.

Boninger, M.L., Cooper, R.A., Fitzgerald, S.G., Lin, J., Cooper, R., Dicianno, B. and Liu B. (2003b). Investigating neck pain in wheelchair users. Am J Phys Med Rehabil, 82(3), 197-202.

Brienza, D.M., Cooper, R.A. and Brubaker, C.E. (1996a). Wheelchairs and seating. Curr Opin Orthoped, 7, 82-86.

Brienza, D., Chung, K., et al. (1996b). System for the analysis of seat support surfaces using surface shape control and simultaneous measure of applied pressures. IEEE Trans Rehabil Eng, 4(2), 103-113.

Brienza, D.M., Karg, P.E., et al. (2001). The relationship between pressure ulcer incidence and buttock-seat cushion interface pressure in at-risk elderly wheelchair users. Arch Phys Med Rehabil, 82(4), 529-533.

Buning, M.E., Angelo, J.A. and Schmeler, M.R. (2001). Occupational performance and the transition to powered mobility: a pilot study. Am J Occup Ther, 55(3), 339-344.

Calder, C.J. and Kirby, R.L. (1990). Fatal wheelchair-related accidents in the United States. Am J Phys Med Rehabil, 69(4), 184-190.

CMS (2003). Power wheelchair coverage overview. Center for Medicare and Medicaid Services, Retrieved August 17, 2003: http://www.cms.hhs/medlearn/PowerWheelchair.pdf

Collins, D., Cooper, R., Cooper, R.A. and Schmeler, M. (2002). Strengthening justification for assistive technology with research findings: a case study RESNA News, Spring, 1.

Cooper, R.A. (1991). High tech wheelchairs gain the competitive edge. IEEE Eng Med Biol Mag, 10(4), 49-55.

Cooper, R.A. (1995a). Intelligent control of power wheelchairs. IEEE Eng Med Biol Mag, 15(4), 423-431.

Cooper, R.A. (1995b). Forging a new future: a call for integrating people with disabilities into rehabilitation engineering. Technol Disabil, 4, 81-85.

Cooper, R.A. (1996). A perspective on the ultralight wheelchair revolution. Technol Disabil, 5, 383-392.

Cooper, R.A. (1998a). Wheelchairs: A Guide to Selection and Configuration, Demos Medical Publishers, New York, NY.

Cooper, R.A. (1998b). Wheelchair research and development for people with spinal cord injury, guest editorial. J Rehabil Res Dev, 35(1), xi.

Cooper, R.A. (1999). Engineering manual and electric powered wheelchairs. Crit Rev Biomed Eng, 27(1/2), 27-74.

Cooper, R.A. and Boninger, M.L. (1999). Walking on your hands. Parapleg New, 53(3), 12-16.

Cooper, RA and Cooper, R. (2003c). Time to mobilize: 21st annual survey of lightweight-wheelchair manufacturers. Sports 'N'Spokes, 29(2), 34-42.

Cooper, R.A., Stewart, K.J. and VanSickle, D.P. (1994a). Evaluation of methods for determining rearward static stability of manual wheelchairs. J Rehabil Res Dev, 31(2), 144-147.

Cooper, R.A., Robertson, R.N., VanSickle, D.P., Stewart, K.J. and Albright, S. (1994b). Wheelchair impact response to ISO test pendulum and ISO standard curb. IEEE Trans Rehabil Eng, 2(4), 240-246.

Cooper, R.A., VanSickle, D.P., Albright, S.J., Stewart, K.J., Flannery, M. and Robertson, R.N. (1995). Power wheelchair range testing and energy consumption during fatigue testing. J Rehabil Res Dev, 32(3), 255-263.

Cooper, RA, Trefler, E. and Hobson, D.A. (1996a). Wheelchairs and seating: issues and practice. Technol Disabil, 5, 3-16.

Cooper, R.A., Robertson, R.N., Lawrence, B., Heil, T., Albright, S.J., VanSickle, D.P. and Gonzalez, J. (1996b). Life-cycle analysis ofdepot versus rehabilitation manual wheelchairs. J Rehabil Res Dev, 33(1), 45-55.

Cooper, R.A., Gonzalez, J., Lawrence, B., Rentschler, A., Boninger, M.L. and VanSickle, D.P. (1997a). Performance of selected lightweight wheelchairs on ANSI/RESNA tests. Arch Phys Med Rehabil, 78(10), 1138-1144.

Cooper, R.A., Boninger, M.L., VanSickle, D.P., Robertson, R.N. and Shimada, S.D. (1997b). Uncertainty analysis of wheelchair propulsion dynamics. IEEE Trans Rehabil Eng, 5(2), 130-139.

Cooper, R.A., Robertson, R.N., VanSickle, D.P. and Boninger, M.L. (1997c). Methods for determining 3-dimensional wheelchair pushrim forces and moments. J Rehabil Res Dev, 34(2), 162-170.

Cooper, R.A., Dvorznak, M.J., O'Connor, T.J., Boninger, M.L. and Jones, D.J. (1998a). Braking electric powered wheelchairs: effect of braking method, seatbelt, and legrests. Arch Phys Med Rehabil, 79(10), 1244-1249.

Cooper, R.A., DiGiovine, C.P., Boninger, M.L., Shimada, S.D. and Robertson, R.N. (1998b). Frequency analysis of 3-dimensional pushrim forces and moments for manual wheelchair propulsion. Automedica, 16, 355-365.

Cooper, R.A., Boninger, M.L. and Rentschler, A. (1999). Evaluation of selected ultralight manual wheelchairs using ANSI/RESNA standards. Arch Phys Med Rehabil, 80(4), 462-467.

Cooper, R.A., O'Connor, T.J., Gonzalez, J.P., Boninger, M.L. and Rentschler, A.J. (1999a). Augmentation of the 100kg ISO wheelchair test dummy to accommodate higher mass. J Rehabil Res Dev, 36(1), 48-54.

Cooper, RA, DiGiovine, C.P., Rentschler, A.J., Lawrence, B.M. and Boninger, M.L. (1999b). Fatigue life of two manual wheelchair cross-brace designs. Arch Phys Med Rehabil, 80(9), 1078-1081.

Cooper, R.A., Jones, D.K., Boninger, M.L., Fitzgerald, S. and Albright, S.J. (2000a). Analysis of position and isometric joysticks for powered wheelchair driving. IEEE Trans Biomed Eng, 47(7), 902-910.

Cooper, R.A., Dvorznak, M.J., Rentschler, A.J. and Boninger, M.L. (2000b). Technical note: displacement between the seating surface and hybrid test dummy during transitions with a variable configuration wheelchair. J Rehabil Res Dev, 37(3), 297-303.

Cooper, R.A., Widman, L.M., Jones, D.K. and Robertson, R.N. (2000c). Force sensing control for electric powered wheelchairs. IEEE Trans Control Syst Technol, 8(1), 112-117.

Cooper, R.A., Fitzgerald, S.G., Boninger, M.L., Prins, K., Rentschler, A.J., Arva, J. and O'Connor, T.J. (2001). Evaluation of a pushrim activated power assisted wheelchair. Arch Phys Med Rehabil, 82(5), 702-708.

Cooper, R.A., Jones, D.K., Spaeth, D.M., Boninger, M.L., Fitzgerald, S.G. and Guo, S.F. (2002a). Comparison of virtual and real electric powered wheelchair driving using a position sensing and an isometric joystick. Med Eng Phys, 24, 703-708.

Cooper, R.A., Thorman, T., Cooper, R., Dvorznak, M.J., Fitzgerald, S.G., Ammer, W., Song-Feng, G. and Boninger, M.L. (2002b). Driving characteristics of electric powered wheelchair users: how far, fast, and often do people drive? Arch Phys Med Rehabil, 83(2), 250-255.

Cooper, R.A., Corfman, T.A., Fitzgerald, S.G., Boninger, M.L., Spaeth, D.M., Ammer, W. and Arva, J. (2002c). Performance assessment of a pushrim activated power assisted wheelchair. IEEE Trans Cont Syst Technol, 10(1), 121-126.

Cooper, R.A., Boninger, M.L., Cooper, R., Dobson, A.R., Schmeler, M., Kessler, J. and Fitzgerald, S.G. (2003a). Technical perspectives: use of the independence 3000 IBOT transporter at home and in the community. J Spinal Cord Med, 26(1), 79-85.

Cooper, RA, Wolf, E., Fitzgerald, S.G., Boninger, M.L., Ulerich, R. and Ammer, W.A. (2003b). Seat and footrest accelerations in manual wheelchairs with and without suspension. Arch Phys Med Rehabil, 84(1), 96-102.

Corfman, T.A., Cooper, R.A., Boninger, M.L., Koontz, A.M. and Fitzgerald, S.G. (2003a). Range of motion and stroke frequency differences between manual wheelchair propulsion and pushrim activated power assisted wheelchair propulsion. J Spinal Cord Med, 26(2), 135-140.

Corfman, T.A., Cooper, R.A., Fitzgerald, S.G. and Cooper, R. (2003b). A video-based analysis of "tips and falls" during electric powered wheelchair driving. Arch Phys Med Rehabil, 84(12), 1797-1802.

Curtis, K.A., Roach, K.E., Applegate, E.B., Amar, T., Benbow, C.S., Genecco, T.D. and Gualano, J. (1995). Development of the wheelchair user's shoulder pain index (WUSPI). Paraplegia, 33(5), 290-293.

Department of Veteran Affairs. Facts about the Department of Veterans Affairs. March 2002. Available at http://www.va. gov/opa/fact/docs/vafacts.htm

DiGiovine, M.M., Cooper, R.A., Boninger, M.L., Lawrence, B.L., VanSickle, D.P. and Rentschler, A.J. (2000). User assessment of manual wheelchair ride comfort and ergonomics. Arch Phys Med Rehabil, 81(4), 490-494.

DiGiovine, C.P., Cooper, R.A., Fitzgerald, S.G., Boninger, M.L., Wolf, E. and Guo, S.F. (2003). Whole-body vibration during manual wheelchair propulsion with selected seat cushions and back supports. IEEE Trans Neural Syst Rehabil Eng, 11(3), 311-322.

Dobson, A., Cooper, R.A., Wolf, E., Fitzgerald, S.G., Ammer, W.A., Boninger, M.L. and Cooper, R. (2003). Evaluation of vibration exposure of power wheelchair users over selected sidewalk pavement surfaces. Proceedings 26th Annual RESNA Conference, Atlanta, GA.

Durable Medical Equipment Regional Carrier (DMERC).Region D Supplier Manual, 54-57, 6-1997. CIGNA Health Care (Chapter IX).

Engel, P. (1991). Aspects of wheelchair seating comfort. Ergo of Manual Wheelchair Prop, 105-111.

Fass, J.M., Cooper, R.A., Fitzgerald, S.G., Schmeler, M., Boninger, M.L., Algood, S.D., Ammer, W.A., Rentschler, A.J. and Duncan, J. (2004). Durability, value, and reliability of selected electric powered wheelchairs. Arch Phys Med Rehabil, 85(5), 805-814.

Fehr, L., Langbein, E. and Skaar, S.B. (2000). Adequacy of power wheelchair control interfaces for persons with severe disabilities: a clinical survey. J Rehabil Res Dev, 37, 353-360.

Fitzgerald, S.G., Yoest, L.M., Cooper, R.A. and Downs, F. (2001). Comparison of laboratory and actual fatigue life for three types of manual wheelchairs. In: Proceedings of the RESNA 2001 Annual Conference (ed. Simpson, R.), 2001 June 22-26; RESNA Press, Reno (NV), Arlington (VA), pp. 352-354.

Fitzgerald, S.G., Cooper, R.A., Boninger, M.L. and Rentschler, A.J. (2001a). Comparison of fatigue life for three types of manual wheelchairs. Arch Phys Med Rehabil, 82(10), 1484-1488.

Fitzgerald, S.G., Thorman, T., Cooper, R. and Cooper, R.A. (2001b). Evaluating wheelchair cushions. Rehabil Manage, 14(1), 42-44.

Geyer, M.D., Brienza, et al. (2001). A randomized control trial to evaluate pressure-reducing seat cushion for elderly wheelchair users. Adv Skin Wound Care, 14(3), 120-129.

Guo, S., Cooper, R.A., Corfman, TA. and Ding, D. (2003). Influence of wheelchair front caster wheel on the reverse driving stability. Assist Technol, 15(2), 98-104

Health Care Financing Administration (1998). Proceedings Rehab Specialities/Wheelchair Documentation, Continuing Education Workshop, Fall, Baltimore, MD.

Hobson, D. (1992). Comparative effects of posture on pressure and shear at the body seat interface. J Rehabil Res Dev, 29(4), 21-31.

Jindrich, D.L. and Full, R.J. (2002). Dynamic stabilization of rapid hexapedal locomotion. J Exp Biol, 205, 2803-2823.

Jones, D.K. and Cooper, R.A. (1998). Electro-mechanical devices for control of powered wheelchairs. Saudi J Disabil Rehabil, 4(3), 200-206.

Kirby, R.L., Ackroyd-Stolarz, SA., Brown, M.G. and Kirkland, SA. (1994). Wheelchair-related accidents caused by tips and falls among non-institutionalized users of manually propelled wheelchairs in Nova Scotia. Am J Phys Med Rehabil, 73, 319-330.

Koontz, A.M., Boninger, M.L., Cooper, R.A., Souza, A.S. and Fay, B.T. (2002). Shoulder kinematics and kinetics during two speeds of wheelchair propulsion. J Rehabil Res Dev, 39(6), 635-650.

Kwarciak, A.M., Cooper, R.A. and Wolf, E. (2002). Effectiveness of rear suspension in reducing shock exposure to manual wheelchair users during curb descents. Proceedings of the 25th Annual RESNA Conference, Minneapolis, MN, pp. 365-367.

Lawn, M., Sakai, T., Kuroiwa, M. and Ishimatsu, T. (2001). Development and practical application of a stair-climbing wheelchair in Nagasaki. Int J Human-Friendly Welfare Robot Syst, 33-39.

Levine, S., Bell, D., Jaros, L., Simpson, R., Koren, Y. and Borenstein, J. (1999). The NavChair assistive wheelchair navigation system, IEEE Trans Rehabil Eng, 7(4), 443-451.

Nachemson, A. (1975). Towards a better understanding of low back pain: a review of the mechanics of the lumbar disc. Rheumatol Rehabil, 14, 129-143.

New Freedom Initiative Act (2001). Available at http:// www.whitehouse.gov/news/freedominitiative/freedomini-tiative.html

Nichols, P.J., Norman, P.A. and Ennis, J.R. (1979). Wheelchair user's shoulder? Shoulder pain in patients with spinal cord lesions. Scand J Rehabil Med, 11, 29-32.

Robertson, R.N., Boninger, M.L., Cooper, RA. and Shimada, S. (1996). Pushrim forces and joint kinetics during wheelchair propulsion. Arch Phys Med Rehabil, 77, 856-864.

Schmeler, M., Kelleher, A., Cooper, R.A. and Cooper, R. (2003). Show me the money. Adv Direct Rehabil, 12(10), 31.

Schunkewitz, J., Sprigle, S. and Chung, K.C. (1989). The effect of postural stress on lower limb blood flow in SCI persons. In: Proceedings of the RESNA 12th Annual Conference, New Orleans, pp. 77-78.

Seidel, H., et al. (1986). Long term effects of whole-body vibration: a critical review of the literature. Int Arch Occup Environ Health, 58, 1-26.

Shalala, D.E., Vladeck, B.C., Wolf, L.F., et al. (1996). Health Care Financing Review: Statistical Supplement, 320-321 (Table 57).

Shimada, S.D., Robertson, R.N., Boninger, M.L. and Cooper, R.A. (1998). Kinematic characterization of wheelchair propulsion stroke patterns. J Rehabil Res Dev, 35(2), 210-218.

Simpson, R.C., Poirot, D. and Baxter, F. (2002). The hephaetstus smart wheelchair system. IEEE Trans Neural Syst Rehabil Eng, 10(2), 118-122.

Spaeth, D.M., Jones, D.K. and Cooper, R.A. (1998). Universal control interface for people with disabilities. Saudi J Disabil Rehabil, 4(3), 207-214.

Sprigle, S. and Sposato, B. (1997). Physiologic effects and design considerations of tilt and recline wheelchairs. Orthop Phys Ther Clin North Am, 6(1), 99-122.

Tai, C.F., Liu, D., Cooper, R.A., DiGiovine, M.M. and Boninger, M.L. (1998). Analysis of vibrations during manual wheelchair use. Saudi J Disabil Rehabil, 4(3), 186-191.

Troy, B.S., Cooper, R.A., Robertson, R.N. and Gray, T. (1997). An analysis of working postures of manual wheelchair users in the office environment. J Rehabil Res Dev, 34(2), 151-161.

Unmat, S. and Kirby, R.L. (1994). Nonfatal wheelchair-related accidents reported to the national electronic injury surveillance system. Am J Phys Med Rehabil, 73(3), 163-167.

Van Roosmalen, L., Bertocci, G.E., Hobson, D.A. and Karg, P. (2002). Preliminary evaluation of wheelchair occupant restraint system usage in motor vehicles. J Rehabil Res Dev, 39(1), 83-93.

VanSickle, D.P., Cooper, R.A., Robertson, R.N. and Boninger, M.L. (1996). Determination of wheelchair dynamic load data for use with finite element analysis. IEEE Trans Rehabil Eng, 4(3), 161-170.

VanSickle, D.P., Cooper, R.A. and Boninger, M.L. (2000). Road loads acting on manual wheelchairs. IEEE Trans Rehabil Eng, 8(3), 385-393.

VanSickle, D.P., Cooper, R.A., Boninger, M.L. and DiGiovine, C.P. (2001). Analysis of vibrations induced during wheelchair propulsion. J Rehabil Res Dev, 38(4), 409-422.

Wang, J., Brienza, D., et al. (1998). Biomechanical analysis of buttock soft tissue using computer-aided seating system. Proceedings of the International Conference of the IEEE Engineering in Medicine and Biology Society, 2757-2759.

Wang, J., Brienza, D.M., et al. (2000). A compound sensor for biomechanical analyses of buttock soft tissue in vivo. J Rehabil Res Dev, 37(4), 433-439.

Wellman, P., Krovi, W., Kuma, V and Harwin, W. (1995). Design of a wheelchair with legs for people with motor disabilities. IEEE Trans Rehabili Eng, 3, pp. 343-353.

Whitman, J.D., Cooper, R.A. and Robertson, R.N. (1998). An automated process to aid in wheelchair selection. Saudi J Disabil Rehabil, 4(3), 180-185.

Wolf, E.J., Cooper, R.A., DiGiovine, C.P. and Ammer, M.L. (2001). Analysis of whole-body vibrations on manual wheelchair using a hybrid III test dummy. Proceedings 24th Annual RESNA Conference, Reno, NV, pp. 346-348.

Wolf, E., Cooper, R,A. and Kwarciak, A. (2002). Analysis of whole body vibrations of suspension manual wheelchairs: utilization of the absorbed power method. Proceedings of the 25th Annual RESNA Conference, Minneapolis, MN, pp. 303-305.

Wolf, E., Cooper, R.A., Dobson, A., Fitzgerald, S.G. and Ammer, W.A. (2003). Assessment of vibrations during manual wheelchair propulsion over selected sidewalk surfaces. Proceedings 26th Annual RESNA Conference, Atlanta, GA.

Yoder, J.D., Baumgartner, E.T. and Skaar, S.B. (1996). Initial results in the development of a guidance system for a powered wheelchair. IEEE Trans Rehabil Eng, 4(3), 143-151.

Was this article helpful?

0 0

Post a comment